Setting up Leica Uno, to log raw data
The equipment setup described is to enable an Uno to log static obs over.
The Viva Uno instrument consists of the CS field controller (CS10/CS15) and the GNSS antenna cap (GS05/GS06) attached to the CS field controller.
1. Set up the tripod.
2. Mount and level the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
4. Place and lock the carrier in the tribrach.
5. Screw the GNSS antenna onto the carrier.
6. Check that the tribrach is still level.
7. Insert the SD card or Compact-Flash card and the battery into the CS field controller.
8. Attach the GNSS antenna cap to CS field controller.
9. Connect the antenna cable to the external GNSS antenna and to the GNSS antenna cap.
10. To hang the instrument on the tripod leg, use the hand strap on the rear of the CS field controller.
11. Attach the tribrach bracket to the carrier and insert the instrument height meter into the tribrach bracket.
12. Measure the antenna height using the instrument height meter.
13. Press the ON/OFF button on the CS field controller for at least 2s to switch on the CS field controller.
14. Create an ‘working style’ for static work, ensuring “Log Raw Obs” is ticked.
15. Occupy the point as normal.