Leica iCON Total Stations

The Leica iCON range combines powerful hardware and software to create increased performance and profitability by streamlining and perfecting construction operation and workflow.

iCON build firmware is an advanced interface specifically created to work alongside the iCON hardware range enabling adaption to any working process. It could be formwork with the Leica iCON Robot 50 Total Station. Flexibility with equipment between construction sites and operators decreases downtime and ultimately saves money. With the need to only learn one set of functions, training time is shortened and motivation increased for users of the equipment. With the combination of the iCON build software and the Leica iCON Robot 50, the iCON solution allows for one person operation with the use of remote controls.

Avaliable on Leica iCON Construction Total Stations iCR70, iCR80, iCR80S, iCB50 and iCB70.

Items 1 to 5 of 14 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  • Leica iCON gps 70 Series

    Ultimate performance for your construction site

    For construction professionals, Leica Geosystems introduces the most efficient GNSS rovers, the Leica iCON gps 70 Series. With the iCON gps 70 T you can measure and stakeout points quicker than ever before without the need to keep the pole vertical and level the bubble. The combination of the latest GNSS technology and inertial measurement unit (IMU) equips the iCON gps 70 T with permanent tilt compensation and makes it resistant to any magnetic interference. Being fully calibration-free, the iCON gps 70 T is ready when you are – anytime, anywhere.

    Free yourself from the boundaries and limitations of working with the pole in vertical positions and increase productivity compared to conventional methods. Collect as-built field data and stakeout designs faster while increasing accuracy and reducing critical errors. Avoid time-consuming procedures and measure where it was not possible before with improved quality control. Focus on your job, your surroundings and your safety – not on holding the pole vertical.

    The iCON gps 70 series is seamlessly integrated into the Leica iCON field software. By keeping the core central interface, following the unrivalled Leica iCON concept, you will benefit from the simple-to-use workflows which require less training and avoid costly downtime.


    Call 01480 404888 or email for price.

  • Leica iCON iCB50 Manual Construction Total Station

    Leica Geosystems’ new manual construction total station, the Leica iCON iCB50, simplifies your first step from conventional analogue layout methods to modern digital techniques which are needed for modern BIM processes. Easy-to-use and designed specifically for applications in the building construction industry, the iCB50 is usable with minimal training of the existing workforce, making you ready for the no-tapes and no-strings approach to construction layout.

    The iCON iCB50 allows users to:

    • Layout points and lines quickly and accurately
    • Layout complex structures easily
    • Quickly perform verticality checks on formwork and structures
    • Complete fast and accurate as-built measurements
    • Work with digital design data including fully rendered models in IFC format

    Working directly with digital design data on board of the instrument allows the operator to prepare and execute construction tasks faster, simpler and more accurately. Benefit from simplified stakeout and as-built tasks on the construction project and the ability to react quicker to changes and updates in the design.

    The iCON iCB50 features:

    • iCON build on-board software
    • 5 inch colour touch screen and full numeric keyboard
    • FineFocus telescope to simply aim to a defined target
    • 2’’ and 5’’ angular accuracy
    • Reflectorless measurements
    • Bluetooth
    • IP66 rating




    Call 01480 404888 or email for price.

  • Leica iCON iCT30 Construction Layout Tool

    High-performance construction layout tool for building construction layout applications

    Increased complexity in construction projects and the strong trend towards digitalisation and Building Information Modelling (BIM) in the Building Construction industry make digital layout methods and processes crucial. Facilitating the move from conventional analogue measurement methods to modern digital layout techniques, Leica Geosystems developed the easy-to-use construction layout tool Leica iCON iCT30 to bring digital and automated layout technology to any construction site.

    The iCON iCT30 construction layout tool combined with the construction-tailored Leica iCON build field software is an easy-to-use and affordable solution to increase productivity by minimizing labour time and mistakes, and on the other hand, increasing accuracy and speed.

    The iCON iCT30 allows users to:

    • Move away from conventional analogue layout methods and easily adopt modern digital layout
    • Increase productivity due to one-person operation of the iCON iCT30
    • Layout lines for various foundation, structure and building exterior applications
    • Layout interior drywall and insulation installations
    • MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work
    • Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations
    • Effectively do as-built checks and control measurements in vertical construction

    With a measurement range of up to 80 m and an angular accuracy of 9”, the iCT30 meets most requirements for layout applications. Forget about disturbances such as reflections, interruptions of line of sight or congestions that slow down the layout process. The iCT30 is specifically developed to robustly deal with difficult site conditions.

    The iCON iCT30 features:

    • 4 buttons keyboard for simple operation
    • Prism search by AutoSearch
    • Most stable lock on prism for construction layout tools
    • Tailored iCON build software with streamlined use of fully rendered models in IFC format
    • Telescope for simpler aiming


    Call 01480 404888 or email for price.

  • Leica iCON iCB70 Manual Construction Total Station

    The Leica iCON iCB70 manual construction total station makes you layout more points per day on your construction project with either prism or reflectorless measurements. Featuring mobile data capability, the iCB70 lets you transfer construction data between the office and the instrument directly, keeping your project progress and plans constantly up to date, assuring that you do not miss any changes in design. Facilitating the move from conventional analogue layout methods to modern digital workflows, the iCB70 helps you to achieve the productivity and accuracies demanded by the building construction industry.

    The iCON iCB70 allows users to:

    • Keep tight project tolerances by measuring to a prism
    • Layout points and lines quickly and accurately, even on complex structures
    • Perform verticality checks on formwork and structures
    • Complete fast and accurate as-built measurements
    • Report volume calculations directly on site
    • Work with digital design data including fully rendered models in IFC format
    • Transfer construction data directly to and from the instrument

    Equipped with the construction-tailored and easy-to-use software platform iCON build, the Leica iCON iCB70 manual construction total station guarantees efficient layout and as-built tasks. Forget about paper plans, tapes, plumb-bobs and chalk-line that cause error-prone layout jobs on your construction site. Leica Geosystems’ new manual construction total stations support you in your no-tapes and no-strings approach to construction layout.

    The iCON iCB70 features:

    • iCON build with ‘build plus’ on-board software
    • 5 inch colour touch screen and full numeric keyboard
    • FineFocus telescope to simply aim to a defined target
    • 1’’, 2’’ and 5’’ angular accuracy
    • Prism and reflectorless measurements
    • Bluetooth and WLAN
    • Mobile data (GSM / GPRS / UMTS / LTE) as an option
    • IP66 rating


    Call 01480 404888 or email for price.

  • Leica ICON iCR70 Robotic Construction Total Station

    Leica Geosystems’ new construction total station, the Leica iCON iCR70, facilitates the move from traditional analogue measurement methods to modern digital layout techniques, which are a necessity within modern BIM processes and achieve the high productivity and accuracies demanded by the building construction industry. iCR70 can be used by the existing construction workforce with minimal training and do not disrupt existing construction processes.

    The iCON iCR70 allows users to:

    • Layout lines for footings or chalk line for formwork on foundation
    • Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete
    • MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work
    • Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations

    Prepare and execute construction tasks faster, simpler and more accurately. This robot, tailored to your construction needs, is designed for one-person operation, giving you approximately an eighty per cent increase of productivity over other conventional layout practices. The iCON iCR70 is your best partner for construction layout, helping you to simplify your work on site, be on time and under budget. With a bullet-proof set up routine, you can be confident that you have the right set up. It guarantees layout efficiency with flexible handling of fully rendered 3D design models in the field. It is designed to accelerate construction and installation processes with ease of use within the construction industry, helping you achieve more layout points all day, every day.

    The iCON iCR70 total station is fully compatible with:

    • Leica iCON CC80 tablet with an enhanced version of the tailored iCON build construction field software
    • Leica Infinity office software and Leica ConX for online sharing of data between the office and the site.

    The iCON iCR70 features:

    • 4 buttons keyboard for simple operation
    • Fast prism search by patented technology SpeedSearch
    • Stable data communication with long-range Bluetooth® (up to 400m)
    • Aligned to modern BIM processes, fully-rendered 3D design models can be easily shared via ConX from the design office to the field crews.


    Call 01480 404888 or email for price.

Items 1 to 5 of 14 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3

The iCONstruct field software works with all iCON equipment which allows for future development and flexibility to suit your needs and allows for expansion at any time. This software is easy to learn and use while not compromising on functionality.

Leica iCON

iCONtrol streamlines workflow through communication between the construction workers and machine control equipment which is suitable all construction sites.

iCONsult provides a thorough support system with advice and guidance on the iCON system with a personal worldwide service.

iCONnect allows for data to be transferred wirelessly through a fast and secure system. This reduces delays, increases productivity and provides instant checks and guidance.

Leica iCON is highly intelligent solution suitable for construction purposes such as buildings, bridges, roads or tunnels.

Further information

Leica-iCON-build-Brochure.pdf Leica-iCONtrol.pdf Leica-iCONtrol-application.pdf

The Survey Equipment Catalogue

SCCS Catalogue

Click here to view


If you would like us to send you a printed version please contact us:


Tel: 01480 404888

Email: sccs@sccssurvey.co.uk

Used Equipment

Used Equipment

SCCS not only offer a great selection of new instruments but also a large selection of used surveying equipment and used GPS equipment.


Click here for used surveying equipment