Dozer

Boost productivity and performance with our easy-to-use grade solutions.

A complete range of integrated 3D machine control solutions for dozers are available for the construction market. Accurate, scalable and easy to use systems help achieve the best from each machine and increase performance, safety and save time.

The Leica iCON grade iGx3 provides automated machine guidance and allows for tasks to be done accurately without the need of stakes, string lines or hubs. The iCON gps 80 machine receiver takes machine control to an all new level to improve performance of the iCON machine control solution. Leica’s SP technology improves grading work to become smoother and more consistent whilst also increasing productivity. With the iCON grade iGD4SP the calculation of the blade tilt and angle can be set and will allow dirt to be moved precisely. For remote access to the machine fleet on the job site, Leica’s iCONnect provides a connection to save time and push productivity. The Leica iCON telematics solution integrates seamlessly with workflows streamlining activities and ultimately saving time and costs.

Items 1 to 5 of 10 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • Leica iCON iGD2 - 2D System

    Intelligent 2D grading solution for dozers

    Leica iCON iGD2 system for dozers can dramatically increase machine utilisation, productivity and optimise material usage on any earthmoving and fine-grading contract. It can be used with a wide range of sensors and combines ease-of-use, unrivalled flexibility with very powerful and intuitive user interface.
    The key to the Leica iCON grade iGD2 system lies in our unique PowerSnap™ concept – a single docking station allowing you easy and quick exchange of panels, depending on the job you need to do. Just snap the control panel into place and get to work.  

    Automatic control of slope and elevation

    The Leica iCON iGD2 system provides automatic control of both slope and elevation. Adding an extra mast and laser sensor even allows you work independently of the slope direction.

    Key Benefits

    Increased productivity

    • Maximises your machine utilisation and return-on-investment from day one, by getting right to grade the first time
    • Save time, setup and go in minutes. iCON iGD2 system remembers all your settings

    Increased flexibility

    • Unique Snap-on & Snap-off capability
    • Easy removal of key components for overnight security.
    • Fully scaleable from basic 2D entry system to full 3D capability. Laser, slope, sonic, GPS and total station control options

    Reduced costs

    • Faster job cycles reduce operating costs
    • Reduce labor costs by reducing or eliminating grade checks, and getting to grade faster and uniformly


    Special features

    • Contact-free, sealed control/display panel – no more connectors or cables
    • Fully graphic display guiding the operator
    • Easy installation typically within one day minimizing machine downtime
    • Fully Waterproof system – designed for the harshest construction environments

    The patented Snap-on & Snap-off technology from Leica Geosystems allows machine sensors and control panels to be interchanged for rapid reconfiguration of machine control hardware.  Swapping control panels and sensor technology has never been easier and faster - alter machine capabilities as your project needs change. 


    Call 01480 404888 or email for price.

  • Leica iCON iGD3 - 3D System

    Intelligent 3D grading solution for dozers

    Leica iCON  iGD3 grading system will revolutionise the way you move dirt and fine-grade. It not only boosts your productivity, it also offers unmatched flexibility. The 3D system brings design surfaces inside the cab. Work independently, and accurately, anywhere on the project design guided by a GNSS system or  a Leica Geosystems robotic total station.Leica iCON grade iGD3 system for dozers can dramatically increase machine utilisation, productivity and optimise material usage on any earthmoving and fine-grading contract. It can be used with a wide range of sensors and combines ease-of-use, unrivalled flexibility with powerful and intuitive user interface. The system integrates Leica iCON telematics which enables you easy data transfer from office to machines, remote support and basic fleet management via the iCON telematics website.
    The key to the Leica iCON grade iGD3 system lies in our unique PowerSnap™ concept – a single docking station allowing you easy and quick exchange of panels, depending on the job you need to do. Just snap the control panel into place and get to work.  

    Key Benefits

    Increased productivity

    • Maximises your machine utilisation and return-on-investment from day one, by getting right to grade the first time
    • Save time, setup and go in minutes. iCON grade iGD3 system remembers all your settings


    Increased flexibility

    • Unique Snap-on & Snap-off capability
    • Easy removal of key components for overnight security.
    • Fully scaleable from basic 2D entry system to full 3D capability. Laser, slope, sonic, GPS and total station control options
    • Simple upgrade step to 3D – buy a 3D-ready panel and upgrade later or rent the GPS/Tracker and 3D software only when you need it


    Reduced costs

    • Faster job cycles reduce operating costs
    • Reduce labor costs by reducing or eliminating grade checks


    More advantage for increasing productivity:

    • Contact-free control panel – no more connectors or cables
    • Automatic side shift control for motor graders with our unique Tri-Sonic or GNSS/TPS sensors. No more overcuts
    • Create a reference surface with up to four slopes
    • Hold slope feature allows precise crown cuts and extending past breaklines when needed
    • Works with many current total stations and GNSS sensors
    • Automatic switch-off of system power when the control panel is removed. Machine specific settings are stored in the docking station
    • iCON telematics services  fully integrated


    Call 01480 404888 or email for price.

  • Leica iCON grade iGD4SP

    Achieve increased productivity on grading jobs with ease!

    With the use of the Leica iCON iGD4SPsolution for 6 way blade equipped dozers maximum speed, flexibility and precision can be achieved. Maintain grade whilst running the dozer to is maximum capabilities. Move dirt precisely where needed with accurate blade tilt and angle calculations and complete work in less time and with less rework

    Achieve more from the dozers 6 way blade with the iGD4SP dual antenna solution. Use the dozer for final trim and fine-grading applications in the same way that a motorgrader is used. Less on-site machines mean less wear on the machines and lower transportation costs. This solution allows machines to be run at maximum speed with accuracy resulting in increased efficiency and profits.


    Benefits of the iGD4SP:

    • Run machines automatically and retain precision without the need to rework.
    • Angle the dozers blade and control windrow effectively for maximum performance. Eradicate the need to repeat passes to clear away dirt build up.
    • The iCON grade solution allows for dozers system expansion as projects grow in size and scope. Only invest in what is required.
    • iGD4SP provides both precision and speed to deliver maximum productivity and increased profit.
    • The CAN technology allows for functionality expansion of the system by simply adding the appropriate components.
    • PowerSnap allows the same panel for each functional level. Purchase licenses for the configurations required.
    • Operation is easier with clear visibility of the blades working area will small diameter masts


    iGD4SP Technology – Highest performance and productivity with Leica SP Technology

    • Fine grade with your bulldozer
    • Fastest speed with high precision
    • Highly accurate and with fast results
    • Incomparable productivity with boosted profitability

    With the use of inertial guidance along with very responsive hydraulic control, grading work is notably enhanced. Dozers which are equipped with SP technology provide precise and dependable grading results at previously impossible speeds on nearly all surfaces


    PowerSnap – A new level of convenience

    • Quick and easy to setup
    • Quickly change between control panels and machines on site
    • One PowerSnap cradle for all iCON panels
    • Easily remove core components for security
    • Cable free connection
    • Safety features to protect system
    • Unique Snap on/off


    Call 01480 404888 or email for price.

  • Leica MC1 3D machine control software

    3D machine control software for your construction site

    To support the digitisation of the heavy construction industry, Leica Geosystems offers a revolutionising software platform for all machine control solutions. Consolidating all machine applications, Leica MC1 is the one-for-all software solution platform to guide and automate all heavy construction machines.

    Comparing the design model to the actual position of the machine’s cutting edge, such as the bucket or blade edge, MC1 machine control software assists the operator to position the machine to achieve the planned design. MC1 software automatically controls the position of the machine’s cutting edge, increasing efficiency for operators on construction sites.

    Leica MC1 is carried by the rugged hardware platform, the Leica MCP80 panel and MDS Series docking station, ensuring an interchangeable panel between machines on a job site. The new MC1 platform is fully integrated into the heavy construction workflow, supported by the cloud-based Leica ConX productivity platform for more efficient management of heavy construction projects.


    Call 01480 404888 or email for price.

  • Leica SP Technology

    Complete precision in all environments

    SP Technology

    Leica SP technology moves bulldozer grading work to a new level with a higher standard and increased consistency. Designed to increase grading productivity with dozers, SP technology supports GPS and total stations to achieve superb results in any working environment.

    SP technology at a glance

    • Increase Productivity and Speed
    • Improve Precision and Smoothness
    • Superlative Performance
    • Increased Flexibility


    Grading at increased speed rates

    Powergrade with SP allows jobs to be finished quicker and with less equipment, allowing machines to be available for the next project much earlier. SP Technology provides improved hydraulic control which can also increase machine utilisation, productivity and optimise material usage on any fine-grading and earthmoving project.


    Increased accuracy and smooth results

    With the use of inertial guidance along with very responsive hydraulic control, grading work is notably enhanced. Dozers which are equipped with SP technology provide precise and dependable grading results at previously impossible speeds on nearly all surfaces. Make use of the dozer for finish work where are grader was always necessary!


    Precise results in any environment

    Leica SP Technology provides high speed precision irrespective of the working environment. The system operates with total stations and GPS and offers flexibility and increased productivity on any project job site.

    Grading a building pad which is surrounded by tall buildings or cutting a new road through a forested area? When GPS is not a choice a total station based machine control system will allow continued work with the 3D system.

    Leica Geosystems understand work changes on a daily basis and machines need to be utilised in varying ways. Therefore Leica products have been developed to provide the freedom to choose when and where you use your machine.


    Increase value of current hardware

    New ways of working are offered with the use of PowerGrade with SP technology. Dozers can undertake finish work and fine-grading, which means less equipment is required on some projects. Challenging jobsites such as urban canyons, deep cuts, mountainous or forested areas will benefit from SP Technology's performance and keep things productive and moving.


    SP Technology Key benefits

    • Fine grade with the dozer
    • Continued accuracy and smoothness at increased speeds
    • Use SP Technology with total stations or GPS
    • Improved machine uptime
    • Increased sensor availability with GPS/GNSS
    • Productivity that raises profitability
    • Reach target grade quicker


    Call 01480 404888 or email for price.

Items 1 to 5 of 10 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2

Machine Control Dozer

The Survey Equipment Catalogue

SCCS Catalogue

Click here to view


If you would like us to send you a printed version please contact us:


Tel: 01480 404888

Email: sccs@sccssurvey.co.uk

Used Equipment

Used Equipment

SCCS not only offer a great selection of new instruments but also a large selection of used surveying equipment and used GPS equipment.


Click here for used surveying equipment